Fittings | Cup Zone

A double nipple with a 1/8" male thread on one side and M5 on the other, used for specific pneumatic..

A double nipple with a male thread of 1/8" on one side and M6 on the other, suitable for specific co..

A double nipple with a 1/8" male thread on one end and an M8 male thread on the other, offering vers..

A double nipple fitting with two 1/4" male threads, made from durable nickel-plated brass...

A double nipple with male threads on both ends, 1/8" size, made of nickel-plated brass for corrosion..

A compact double nipple fitting with M5 male threads on both ends, ideal for small-scale pneumatic a..

A flexible joint with two 1/4" female threads and a maximum angle of 20°, designed for limited angul..

A flexible joint with two 1/4" female threads, providing a higher angle of movement (up to 60°) for ..

A flexible joint featuring two 3/8" female threads, allowing a maximum angular movement of 20°, idea..

A flow resistance fitting with a 1/4" male thread, designed with a fixed aperture of 1.0 mm to regul..

A flow resistance fitting with a 1/8" male thread, designed to create controlled resistance and limi..

A 1/4" male-threaded flow valve with a self-cleaning effect, designed to reduce net leakage to 1.95 ..

A 1/4" male-threaded flow valve with a self-cleaning effect, ensuring a net leakage of 1.8 m³/h, ide..

A flow valve equipped with a flow pin, designed to minimize leakage at a rate of 0.4 m³/h, ensuring ..

A flow valve with a flow pin that controls the flow and reduces leakage to 0.7 m³/h, providing enhan..

A flow valve designed with a flow pin to regulate fluid flow and minimize leakage, maintaining a net..